La rugosidad de la superficie depende de la malla utilizada y se ofrece en dos versiones:
Pequeña – de 4,5 grabados por 1cm (calidad W);
Grande – de 2,5 grabados por 1 cm (calidad WL).

Gluing classes Plywood is glued with waterproof phenol formaldehyde resin adhesive.

The weather and boiling water resistant bonding meets the requirements of the following standards:

EN 314 / 3rd class;

BS 1203 / H 4 (previously WBP);

DIN 68705 Part 3 / type BFU 100.

Formaldehyde emission In accordance with the standard EN 13986 the formaldehyde emission meets the Class E1 requirements (test method EN 717 Part 2). Plywood glued with phenol-formaldehyde resins meets the CARB Phase 2 and Japanese 4-Star Regulation’s requirements. Overlaying A smooth phenol or an UV resistant film, which is hot-pressed onto the surface, is used as an overlay. The phenol film is composed of a basic paper which is impregnated with phenol resin. The UV resistant film is impregnated with special thermosetting mixture of polymers containing amino resins. On special request, panels can be overlaid with wear resistant phenol film or/and multi-layer phenol film and both the sides can have a wire mesh pattern. Wire mesh pattern alternatives: Ÿ Large Mesh (grade WL) – 2.5 mesh per 1cm Ÿ Small Mesh (grade W) – 4.5 mesh per 1cm

Se utiliza para los pisos de vehículos de transporte, puentes peatonales, suelos de almacenes y fábricas, estanterías de los almacenes, plataformas de carga, cubiertas de buques, superficies de viaductos, andamios en las obras de construcción.